Made to Order Dactyl Manuform Cases
These are made-to-order Dactyl Manuform cases with right and left top halves, bottom plates, and controller/trrs jack holders.
BIG NOTE: This is a 3D-printed case ONLY for a DIY build. it is not a finished keyboard! You'll need to source controllers, TRRS jacks, wiring, key switches, and keycaps.
Size options (rows x columns) are: 3x5, 3x6, 4x5, 4x6, 5x6, 5x7, 6x6, and 6x7
Here's renders of all the sizes we offer and a link to the size variants (standard, full-bottom rows, and whole matrix.)
https://wylderbuilds.com/all-sizes
https://wylderbuilds.com/sizes-explained
No extra charge for different thumb cluster styles on each half.
All cluster types can be found here: cluster-types.
You can specify thumb clusters for each side at checkout.
Trackball Thumb Clusters
At $10 per side ($20 for dual trackballs), a 34mm trackball socket and sensor mount for a PMW 3360 can be included. We offer a trackball hardware kit here: trackball-kit
Trackball thumb cluster options are:
Wyld 3-key trackball cluster (NEW!)
Classic 4-key trackball cluster
Classic 3-key trackball cluster
Turnaround from order to shipment is 3 to 7 business days per order as each unit requires three to four days to print and process, depending on stock and demand.
The default material is PLA but you can ask for PETG, ABS, or ASA if you prefer those.
If you're looking for a hot-swap capable build, I recommend using my Amoeba Kings
Here's my new guide for getting trackballs installed and working with QMK:
https://wylderbuilds.com/trackball-install
We offer a full DIY build kit:
https://wylderbuilds.com/shop/p/manuform-diy-kit
And, of course, we offer FULL BUILDS of the all our Dactyl Manuforms, including the Polydactyl.
https://wylderbuilds.com/shop/p/dactyl-manuform-build
The 3D models used for all our prints are generated using a customized version of the terrific open source codebase maintained by Joshua Shreve (joshreve) found here:
https://github.com/joshreve/dactyl-keyboard
And here's our own repo. Watch your toes, it’s a work in progress.
https://github.com/bullwinkle3000/dactyl-keyboard
These are made-to-order Dactyl Manuform cases with right and left top halves, bottom plates, and controller/trrs jack holders.
BIG NOTE: This is a 3D-printed case ONLY for a DIY build. it is not a finished keyboard! You'll need to source controllers, TRRS jacks, wiring, key switches, and keycaps.
Size options (rows x columns) are: 3x5, 3x6, 4x5, 4x6, 5x6, 5x7, 6x6, and 6x7
Here's renders of all the sizes we offer and a link to the size variants (standard, full-bottom rows, and whole matrix.)
https://wylderbuilds.com/all-sizes
https://wylderbuilds.com/sizes-explained
No extra charge for different thumb cluster styles on each half.
All cluster types can be found here: cluster-types.
You can specify thumb clusters for each side at checkout.
Trackball Thumb Clusters
At $10 per side ($20 for dual trackballs), a 34mm trackball socket and sensor mount for a PMW 3360 can be included. We offer a trackball hardware kit here: trackball-kit
Trackball thumb cluster options are:
Wyld 3-key trackball cluster (NEW!)
Classic 4-key trackball cluster
Classic 3-key trackball cluster
Turnaround from order to shipment is 3 to 7 business days per order as each unit requires three to four days to print and process, depending on stock and demand.
The default material is PLA but you can ask for PETG, ABS, or ASA if you prefer those.
If you're looking for a hot-swap capable build, I recommend using my Amoeba Kings
Here's my new guide for getting trackballs installed and working with QMK:
https://wylderbuilds.com/trackball-install
We offer a full DIY build kit:
https://wylderbuilds.com/shop/p/manuform-diy-kit
And, of course, we offer FULL BUILDS of the all our Dactyl Manuforms, including the Polydactyl.
https://wylderbuilds.com/shop/p/dactyl-manuform-build
The 3D models used for all our prints are generated using a customized version of the terrific open source codebase maintained by Joshua Shreve (joshreve) found here:
https://github.com/joshreve/dactyl-keyboard
And here's our own repo. Watch your toes, it’s a work in progress.
https://github.com/bullwinkle3000/dactyl-keyboard
